MSR145 IP67 Fast Peak Acceleration Data Logger, ±15 g
Three-axis ±15 g data logger with Fast Peak acquisition at 1 kHz for capturing brief acceleration peaks. Recording intervals remain selectable up to 50 Hz, in a compact silicone-tube housing with a 230 mAh rechargeable battery.
The 145B4A4 adds Fast Peak capture to three-axis acceleration measurement over ±15 g. Fast Peak acquires acceleration peaks at 1,000 measurements per second, helping retain brief maxima between the selected recording points. The configurable storage rate is up to 50 readings per second, with intervals extending to 12 hours; Fast Peak is not a continuous 1 kHz waveform recording mode. Internal memory holds more than two million measured values.
The encapsulated silicone-tube housing is rated IP67, meaning it is dust-tight and protected against temporary immersion under specified test conditions. Its 230 mAh lithium-polymer battery is rechargeable via USB. Use the button to control recording or mark events, then transfer the measurements to a PC for evaluation with the included MSR PC Software Pro.
Benefits
- Fast Peak captures short acceleration maxima at 1 kHz
- Three-axis ±15 g measurement
- Selectable storage rate up to 50 Hz
- Compact, encapsulated silicone-tube housing
- Rechargeable battery and USB analysis with MSR PC Software Pro
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145B4A4 |
| Housing | Silicone tube, encapsulated |
| Protection rating | IP67 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 20 × 14 × 62 mm |
| Approximate data logger housing weight | 18 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB |
| Internal memory | Over 2,000,000 measured values |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 0.02 second to 12 hours |
| Fast Peak | 1 kHz peak acquisition; recording interval remains 0.02 second to 12 hours |
Included configuration
- MSR145 data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro