MSR145 Type-K Thermocouple Data Logger with One 20 cm Connection
Data logger with one Type-K thermocouple connection on a 20 cm cable, supporting −200 to +1350 °C and up to four readings per second. A suitable thermocouple must be supplied separately.
This MSR145 configuration contains one FT3/020 Type-K thermocouple connection on a 20 cm cable. It supports measurements from −200 to +1350 °C at up to four readings per second, with longer recording intervals available up to 12 hours. The usable temperature range also depends on the selected thermocouple, which is not included. The data logger must remain within its own −20 to +65 °C operating range.
The compact B15 polycarbonate housing contains a 230 mAh rechargeable battery and memory for more than two million measured values. IP60 means the housing is dust-tight, with no water-protection rating. USB is used for battery charging and data transfer. Included MSR PC Software Pro supports configuration and analysis of the temperature recordings.
Benefits
- One Type-K connection on a 20 cm cable
- Supports a wide −200 to +1350 °C measurement range with a suitable thermocouple
- Recording rate up to four readings per second
- More than two million measured values stored internally
- 230 mAh rechargeable battery and USB analysis
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145B15 & FT3/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 27 × 16 × 53 mm |
| Approximate data logger housing weight | 20 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB |
| Internal memory | Over 2,000,000 measured values |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Type K measurement range | −200 to +1,350 °C |
| Type K recording interval | 0.25 second to 12 hours |
| Type K connection | One FT3/020 connection, 20 cm cable; thermocouple sensor not included |
| External component FT3/020 | 1 × FT3/020; cable 20 cm |
| Wetted materials | Stainless steel AISI 316L and Viton 70 Shore O-rings |
| External component FP4/020 | 1 × FP4/020; cable 20 cm |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Light range | 0–83,000 lx |
| Light sensitivity | Maximum at 550 nm |
| Light interval | 1 second to 12 hours |
Included configuration
- MSR145 data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Suitable Type K thermocouple sensor, supplied separately