MSR145W2D Wi-Fi Data Logger with Four Analogue Inputs, Control Terminal and FlexConnector
Wi-Fi data logger combining four 0–3 V analogue inputs, a recording/alarm control terminal and a FlexConnector for an optional sensor. Includes 20 cm connection cables, a colour OLED display and a 900 mAh rechargeable battery.
This MSR145W2D records four analogue 0–3 V signals through E3333/020. The FY/020 control terminal provides an alarm output, an external recording start/stop input and a 3 V output. FX/020 supplies a FlexConnector for a compatible interchangeable MSR FlexSensor, which must be chosen separately. Each of the three assemblies has a 20 cm cable. Recording intervals range from one second to 12 hours, with storage for more than one million measured values.
A colour OLED display provides local checks, and Wi-Fi supports continuous or scheduled data transfer. Recorded values remain available locally if the network is interrupted; USB offers readout and charging. MSR LocalCloud or SmartCloud can be used with the necessary setup and service arrangements. The B23 housing contains a 900 mAh rechargeable battery. Its IP60 rating means the polycarbonate enclosure is dust-tight but has no water-protection rating.
Benefits
- Four analogue inputs configured for 0–3 V
- Alarm output and external recording control through FY/020
- FlexConnector for a separately selected FlexSensor
- Wi-Fi transfer plus local memory and USB readout
- OLED display and larger 900 mAh rechargeable battery
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145W2DB23 & E3333/020 & FY/020 & FX/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 900 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 35 × 25 × 57 mm |
| Approximate data logger housing weight | 43 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB, WiFi |
| Internal memory | Over 1,000,000 measured values |
| OLED display | 96 × 64 pixels |
| Logging interval | 1 second to 12 hours |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Analogue inputs | 4 × 0–3.0 V |
| Analogue resolution | 12 bit |
| Analogue interval | 1 second to 12 hours |
| Control terminal | Alarm output, start/stop input and 3 V voltage output |
| FlexConnector | Connection for interchangeable MSR FlexSensors |
| External component E3333/020 | 1 × E3333/020; cable 20 cm |
| External component FY/020 | 1 × FY/020; cable 20 cm |
| External component FX/020 | 1 × FX/020; cable 20 cm |
| External component FH3/100 | 2 × FH3/100; cable 100 cm |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- MSR145W2D data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible WiFi network or access point for wireless transfer
- MSR SmartCloud account and activation are required if cloud transfer is used
- Suitable external signal sources; observe the configured input voltage range
- Compatible FlexSensor for use of the FlexConnector; no FlexSensor is included in this product code