MSR145W2D Wi-Fi Strain-Gauge Data Logger with OLED Display
Wi-Fi data logger with one 20 cm connection for a compatible full-bridge strain gauge and a 3 V bridge supply. Offers OLED readout, local memory and scheduled wireless transfer; the strain gauge is not included.
This MSR145W2D connects to one compatible full-bridge strain gauge through FD/020, a 20 cm cable assembly with a 3 V bridge supply. Recording intervals range from one second to 12 hours, and more than one million measured values can be stored. The strain gauge is required separately; check its compatibility against the confirmed FD specification.
The OLED display provides local readings, while Wi-Fi allows scheduled transfer or continuous observation through the supported MSR software. Local memory preserves recorded data during a Wi-Fi interruption, with USB available for readout. Data can be managed through MSR LocalCloud or SmartCloud after the necessary setup and service arrangements.
A 230 mAh rechargeable battery powers the B25 device and charges via USB. Its polycarbonate housing is rated IP60, meaning it is dust-tight but has no water-protection rating. MSR PC and WLAN software support setup and analysis.
Benefits
- One full-bridge connection with a 20 cm cable and 3 V supply
- OLED readings and Wi-Fi access
- Scheduled transfer can reduce wireless power consumption
- Local memory and USB readout when Wi-Fi is unavailable
- Support for MSR LocalCloud and SmartCloud
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145W2DB25 & FD/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 35 × 17 × 57 mm |
| Approximate data logger housing weight | 27 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB, WiFi |
| Internal memory | Over 1,000,000 measured values |
| OLED display | 96 × 64 pixels |
| Logging interval | 1 second to 12 hours |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Strain gauge connection | Full bridge; rated output 1–4 mV/V; bridge voltage 3 V |
| Strain gauge interval | 1 second to 12 hours |
| External component FD/020 | 1 × FD/020; cable 20 cm |
| Relative humidity range | 0–100 % RH |
| Humidity accuracy H3/FH3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Humidity sensor temperature limits | External: −40 to +125 °C; internal: −20 to +65 °C |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- MSR145W2D data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible WiFi network or access point for wireless transfer
- MSR SmartCloud account and activation are required if cloud transfer is used
- Compatible full-bridge strain gauge; the product code specifies the connection, not a strain gauge sensor