MSR160 Data Logger with Four Analogue Inputs and microSD, 1000 Hz per Channel
Four 0–3 V analogue channels at up to 1,000 readings per second per channel, with microSD storage for more than one billion measured values. Includes a formatted card, alarm output and external recording control.
This MSR160 combines four E3333 analogue 0–3 V inputs with the N10006 microSD expansion. Each input can record at up to 1,000 readings per second, with selectable slower intervals up to 12 hours. Compatible external signal sources or sensors are connected separately. An alarm output and a recording start/stop input are included.
The supplied, formatted microSD card is at least 4 GB and expands capacity to more than one billion measured values, alongside internal memory for over two million values. MSR specifies that the card can be replaced during operation. Capacity is shared across the recorded channels, and recording duration also depends on power and sampling settings.
The B7 housing and microSD slot with card are rated IP60: dust-tight, with no water-protection rating. USB provides charging and data transfer. Included MSR PC software handles configuration and analysis of the recordings.
Benefits
- Four 0–3 V channels with up to 1 kHz per channel
- Included microSD expansion and formatted card of at least 4 GB
- Storage capacity above one billion measured values
- Card replacement during operation
- Alarm output, recording-control input and USB analysis
Applications
- Industrial signal recording
- Sensor evaluation
- Machine and process monitoring
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Model family | MSR160 |
| Product code | 160B7 & E3333 & N10006 |
| Memory | More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion |
| Memory extension | N10006; ≥4 GB formatted microSD card; exposed slot rated IP60 |
| Analogue inputs | 4 × 0–3 V (E3333); 12-bit resolution |
| Analogue sampling | 1,000/s per channel to every 12 h |
| Control I/O | Alarm output; recording start/stop input |
| Operating temperature | −20 to +65 °C |
| Interface | USB |
| Dimensions (W × H × L) | 39 × 23 × 72 mm |
| Approximate weight | 80 g |
| Battery | 900 mAh rechargeable LiPo |
| Housing/protection | B7, non-encapsulated; IP60 |
| Data Logger weight | Approx. 36 g |
| Data Logger operating temperature | −20 to +65 °C |
| Humidity accuracy FH3.3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
Included configuration
- 1 × MSR160 data logger configured as 160B7 & E3333 & N10006
- Specified battery supply
- MSR PC software available for download
- N10006 expansion and one formatted microSD card, at least 4 GB
- USB cable
- Screw set
- Quick start guide
Requirements and accessories
- Windows PC with USB port for configuration and data evaluation; verify current supported OS release
- Compatible external sensors or sources with 0–3 V outputs; these third-party sensors are not specified in this offer
- Observe IP60 (dust-tight, with no water protection rating) limitation at the microSD slot