MSR165 ±15 g Shock and Climate Data Logger with Four Analogue Inputs and microSD
Extended-battery data logger combining ±15 g acceleration, temperature, humidity and pressure with four analogue 0–3 V inputs. Includes microSD storage and two replaceable 5,800 mAh batteries; analogue and acceleration rates have a specific operating dependency.
This MSR165 combines ±15 g three-axis acceleration with temperature (−20 to +65 °C), humidity (0–100% RH), absolute air pressure (10–2,000 mbar) and four E3333 analogue 0–3 V inputs. Acceleration records at up to 1,600 readings per second with 32 pre-trigger values. Environmental channels record up to once per second. Analogue inputs normally record up to once per second; 1,000 readings per second are available only when acceleration is set below one reading per second. An alarm output and external recording start/stop input are included.
Two replaceable 5,800 mAh Li-SOCl₂ batteries in the splashproof B52 cast-aluminium case provide extended power. Actual endurance depends on the selected rates and connected equipment. N10006 supplies a formatted microSD card of at least 4 GB for more than one billion measured values. The card slot is IP60: dust-tight, with no water-protection rating.
USB and the removable card provide data transfer to the included MSR PC software and ShockViewer for configuration, evaluation and reports. External analogue sensors are not included.
Benefits
- Shock and climate measurements plus four 0–3 V analogue inputs
- Explicit rate selection for analogue and acceleration recording
- Alarm output and external recording control
- Two replaceable 5,800 mAh batteries
- Included microSD expansion and MSR analysis software
Applications
- Transport monitoring
- Machine fault diagnosis
- Load and vibration investigations
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Model family | MSR165 |
| Product code | 165B52T9H3P5A & E3333 & N10006 |
| Memory | More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion |
| Memory extension | N10006; ≥4 GB formatted microSD card; exposed slot rated IP60 |
| Analogue inputs | 4 × 0–3 V (E3333); 12-bit resolution |
| Analogue sampling | 1/s to every 12 h; 1,000/s available only when acceleration rate is below 1/s |
| Control I/O | Alarm output; recording start/stop input |
| Acceleration range | ±15 g, three axes |
| Acceleration resolution | 13 bit |
| Acceleration measurement/storage rate | Up to 1,600/s (±15%) to every 12 h |
| Acceleration accuracy at +25 °C | ±0.15 g (0–5 g); ±0.3 g (5–15 g) |
| Pre-trigger recording | 32 values before the shock event |
| Temperature range | −20 to +65 °C |
| Humidity range | 0–100 % RH |
| Pressure range | 10–2,000 mbar absolute |
| Environmental sensor recording interval | 1 second to 12 hours |
| Operating temperature | −20 to +65 °C |
| Interface | USB |
| Dimensions (W × H × L) | 122 × 92 × 70 mm |
| Approximate weight | 530 g |
| Battery | 2 × 5,800 mAh replaceable Li-SOCl₂, 3.6 V |
| Housing/protection | Splashproof cast aluminium battery housing; microSD slot IP60 |
| Temperature accuracy T9 | ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply |
| Humidity accuracy H3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Air pressure accuracy P5 | ±2 mbar (750–1,100 mbar absolute, +25 °C) |
Included configuration
- 1 × MSR165 data logger configured as 165B52T9H3P5A & E3333 & N10006
- Specified battery supply
- MSR PC software available for download
- N10006 expansion and one formatted microSD card, at least 4 GB
- USB cable
- Screw set
- Transport case
- Quick start guide
Requirements and accessories
- Windows PC with USB port for configuration and data evaluation; verify current supported OS release
- Compatible external sensors or sources with 0–3 V outputs; these third-party sensors are not specified in this offer
- Observe IP60 (dust-tight, with no water protection rating) limitation at the microSD slot