MSR165 IP67 ±15 g Shock Data Logger with Temperature, Humidity and Air Pressure
Record three-axis shocks and vibrations up to ±15 g together with temperature, humidity and absolute air pressure. Features 1,600 Hz acceleration recording, pre-trigger data and a USB-rechargeable 1000 mAh battery.
This MSR165 combines a three-axis ±15 g acceleration sensor with internal temperature, humidity and absolute air-pressure sensors. Acceleration is recorded at up to 1,600 readings per second, with 32 values retained before a shock trigger. The environmental channels cover −20 to +65 °C, 0–100% RH and 10–2,000 mbar absolute, at intervals from one second to 12 hours. They provide context for the mechanical events in the same recording.
More than two million measured values fit in internal memory. The encapsulated B8 housing is rated IP67: dust-tight and protected against temporary immersion under specified test conditions. A 1000 mAh battery recharges through USB. MSR's quoted endurance of up to six months applies to shock monitoring with this battery type and depends on the measurement setup and conditions. Included MSR PC software and ShockViewer support configuration, USB readout, graphical shock analysis and reports.
Benefits
- ±15 g shock and vibration data with temperature, humidity and air pressure
- Acceleration recording up to 1,600 Hz
- Pre-trigger storage captures 32 values before a shock
- More than two million measured values in internal memory
- Encapsulated housing, rechargeable battery and included analysis software
Applications
- Transport monitoring
- Machine fault diagnosis
- Load and vibration investigations
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Model family | MSR165 |
| Product code | 165B8T9H3P5A |
| Memory | More than 2,000,000 measured values internally |
| Acceleration range | ±15 g, three axes |
| Acceleration resolution | 13 bit |
| Acceleration measurement/storage rate | Up to 1,600/s (±15%) to every 12 h |
| Acceleration accuracy at +25 °C | ±0.15 g (0–5 g); ±0.3 g (5–15 g) |
| Pre-trigger recording | 32 values before the shock event |
| Temperature range | −20 to +65 °C |
| Humidity range | 0–100 % RH |
| Pressure range | 10–2,000 mbar absolute |
| Environmental sensor recording interval | 1 second to 12 hours |
| Operating temperature | −20 to +65 °C |
| Interface | USB |
| Dimensions (W × H × L) | 39 × 23 × 72 mm |
| Approximate weight | 69 g |
| Battery | 1,000 mAh rechargeable LiPo |
| Housing/protection | Anodised aluminium/PC; IP67 |
| Temperature accuracy T9 | ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply |
| Humidity accuracy H3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Air pressure accuracy P5 | ±2 mbar (750–1,100 mbar absolute, +25 °C) |
| Air pressure accuracy P5 | ±2 mbar (750–1,100 mbar absolute, +25 °C) |
| Static acceleration accuracy at +25 °C | ±0.15 g (0–5 g); ±0.25 g (5–10 g); ±0.45 g (10–15 g) |
Included configuration
- 1 × MSR165 data logger configured as 165B8T9H3P5A
- Specified battery supply
- MSR PC software available for download
- USB cable
- Screw set
- Transport case
- Quick start guide
Requirements and accessories
- Windows PC with USB port for configuration and data evaluation; verify current supported OS release