MSR165 IP67 Shock and Vibration Data Logger, ±15 g, with Temperature

SKU: 165B8T9A
Regular price 1,484.00 € (ex VAT)

Three-axis ±15 g shock and vibration data logger with acceleration recording up to 1,600 Hz and an internal temperature sensor. Pre-trigger storage retains 32 values before a shock; the 1000 mAh battery recharges via USB.

 

The 165B8T9A measures shocks and vibrations over ±15 g in three axes at up to 1,600 readings per second. Shock-event recording includes 32 measured values before the trigger, helping show how an event began. The internal temperature sensor records −20 to +65 °C at intervals from one second to 12 hours, adding a temperature history to the acceleration data. Internal memory holds more than two million measured values.

The B8 housing is encapsulated and rated IP67: dust-tight and protected against temporary immersion under specified test conditions. Its 1000 mAh battery is rechargeable through USB. MSR quotes up to six months for shock monitoring with this battery type; actual endurance depends on the recording setup and conditions, rather than memory capacity alone. USB transfers readings to the included MSR PC software. MSR ShockViewer provides graphical evaluation of shock-mode data and report creation.

Benefits

  • Three-axis ±15 g shock and vibration recording up to 1,600 Hz
  • 32 pre-trigger values preserve the lead-up to a shock
  • Temperature history recorded alongside acceleration
  • Encapsulated housing and 1000 mAh rechargeable battery
  • Included software for readout, shock analysis and reports

Applications

  • Transport monitoring
  • Machine fault diagnosis
  • Load and vibration investigations



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Model family MSR165
Product code 165B8T9A
Memory More than 2,000,000 measured values internally
Acceleration range ±15 g, three axes
Acceleration resolution 13 bit
Acceleration measurement/storage rate Up to 1,600/s (±15%) to every 12 h
Acceleration accuracy at +25 °C ±0.15 g (0–5 g); ±0.3 g (5–15 g)
Pre-trigger recording 32 values before the shock event
Temperature range −20 to +65 °C
Environmental sensor recording interval 1 second to 12 hours
Operating temperature −20 to +65 °C
Interface USB
Dimensions (W × H × L) 39 × 23 × 72 mm
Approximate weight 69 g
Battery 1,000 mAh rechargeable LiPo
Housing/protection Anodised aluminium/PC; IP67
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Battery 900 mAh rechargeable LiPo
Housing/protection B7, non-encapsulated; IP60
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Humidity accuracy H3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Air pressure accuracy P5 ±2 mbar (750–1,100 mbar absolute, +25 °C)
Static acceleration accuracy at +25 °C ±0.15 g (0–5 g); ±0.25 g (5–10 g); ±0.45 g (10–15 g)

 

Included configuration

  • 1 × MSR165 data logger configured as 165B8T9A
  • Specified battery supply
  • MSR PC software available for download
  • USB cable
  • Screw set
  • Transport case
  • Quick start guide

Requirements and accessories

  • Windows PC with USB port for configuration and data evaluation; verify current supported OS release

Documents and resources