MSR145WD Bluetooth Data Logger with External Temperature, Humidity and Fluid-Pressure Sensors

Tuotenumero: 145WDB25 & FT2/100 & FT2/100 & FH3/100 & FP9/100
Normaali hinta 1,090.00 € (ex VAT)

Bluetooth data logger with two external temperature probes, one humidity/temperature probe and one relative fluid-pressure sensor, all on 1 m cables. Read the four probe positions on the OLED display or through the MSR DataLogger app.

 

This MSR145WD combines two FT2 temperature probes covering −55 to +125 °C, an FH3 humidity probe covering 0–100% RH with integrated temperature measurement, and an FP9 relative fluid-pressure sensor covering −1,000 to +3,000 mbar. Each probe has a 1 m cable. The FH3 sensor operates from −40 to +125 °C, while the FP9 operates from −20 to +85 °C and also measures temperature. Its wetted parts are AISI 316L stainless steel and Viton seals; compatibility with the medium must be checked.

Record at intervals from one second to 12 hours and store more than one million measured values. The colour OLED display and Bluetooth app give access to measurements; USB provides PC readout and charges the 230 mAh battery. The data logger itself operates from −20 to +65 °C. Its B25 housing is rated IP60: dust-tight, with no water-protection rating. MSR PC software is included; a cloud gateway is optional.

Benefits

  • Two separate external temperature probes plus humidity and fluid-pressure sensing
  • A 1 m cable for every external probe
  • Relative fluid-pressure range includes negative gauge pressure
  • OLED display and Bluetooth app access
  • More than one million measured values and USB-rechargeable battery

 



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Product code 145WDB25 & FT2/100 & FT2/100 & FH3/100 & FP9/100
Housing Polycarbonate, not encapsulated
Protection rating IP60
Battery 230 mAh rechargeable lithium-polymer
Charging USB
Dimensions of data logger (W × H × L) 35 × 17 × 57 mm
Approximate data logger housing weight 27 g; connected sensor assemblies add weight
Operating temperature of data logger −20 to +65 °C
Storage conditions +5 to +45 °C; 10–95 % RH, non-condensing
Interfaces USB, Bluetooth Low Energy
Internal memory Over 1,000,000 measured values
OLED display 96 × 64 pixels
Logging interval 1 second to 12 hours
PC requirement Windows 10 or higher for current MSR PC Software Pro
Relative humidity range 0–100 % RH
Humidity accuracy H3/FH3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Humidity sensor temperature limits External: −40 to +125 °C; internal: −20 to +65 °C
Humidity interval 1 second to 12 hours
Humidity sensor additional channel Integrated temperature
Fluid pressure range −1,000 to +3,000 mbar relative
Fluid pressure accuracy ±30 mbar (1 % FS)
Fluid sensor operating temperature −20 to +85 °C
Wetted materials Stainless steel AISI 316L and Viton 70 Shore O-rings
External temperature range FT2 −55 to +125 °C
External temperature accuracy FT2 ±0.5 °C (−10 to +65 °C); ±2 °C (−55 to +125 °C)
External component FT2/100 2 × FT2/100; cable 100 cm
External component FH3/100 1 × FH3/100; cable 100 cm
External component FP9/100 1 × FP9/100; cable 100 cm
Acceleration recording interval 1 second to 12 hours


 

Included configuration

  • MSR145WD data logger in the specified housing with rechargeable battery
  • Selected sensors and connections listed in this configuration
  • MSR PC software (download)
  • USB connection cable
  • Activation key for free access to MSR SmartCloud

Requirements and accessories

  • Windows 10 or higher with USB connection for current MSR PC Software Pro
  • Compatible mobile device and MSR DataLogger app for Bluetooth access
  • MSR SmartCloud account and activation are required if cloud transfer is used; a BLE gateway is optional
  • Compatible process connection and media for the pressure sensor’s wetted materials

Documents and resources