MSR145 Data Logger with External 0–30 bar Absolute Fluid-Pressure Sensor
Compact data logger with an external 0–30 bar absolute fluid-pressure sensor on a 20 cm cable. Captures pressure at up to 10 readings per second and includes temperature measurement in the pressure sensor.
This MSR145 uses an external FP4/020 sensor to record absolute fluid pressure from 0 to 30 bar. The 20 cm cable separates the pressure measuring point from the data logger. Pressure recording reaches ten readings per second, with longer intervals selectable up to 12 hours. Temperature measurement is integrated into the pressure sensor, whose operating range is −20 to +85 °C. Wetted materials are AISI 316L stainless steel and Viton seals, which must be compatible with the measured medium.
The data logger itself operates from −20 to +65 °C and stores more than two million measured values. Its B15 polycarbonate housing contains a 230 mAh rechargeable battery and is rated IP60: dust-tight, with no water-protection rating. USB provides charging and readout, while the included MSR PC Software Pro supports setup and measurement analysis.
Benefits
- External absolute fluid-pressure measurement from 0 to 30 bar
- Pressure recording up to 10 Hz
- 20 cm cable and integrated sensor temperature measurement
- AISI 316L stainless steel and Viton wetted components
- Compact USB-rechargeable data logger with included analysis software
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145B15 & FP4/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 27 × 16 × 53 mm |
| Approximate data logger housing weight | 20 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB |
| Internal memory | Over 2,000,000 measured values |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Fluid pressure range | 0–30 bar absolute |
| Fluid pressure accuracy | ±0.3 bar (1 % FS) |
| Fluid pressure interval | 0.1 second to 12 hours |
| Fluid sensor operating temperature | −20 to +85 °C |
| Wetted materials | Stainless steel AISI 316L and Viton 70 Shore O-rings |
| External component FP4/020 | 1 × FP4/020; cable 20 cm |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Light range | 0–83,000 lx |
| Light sensitivity | Maximum at 550 nm |
| Light interval | 1 second to 12 hours |
Included configuration
- MSR145 data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible process connection and media for the pressure sensor’s wetted materials