MSR145W2D Wi-Fi Data Logger for Temperature, Humidity, Pressure and Acceleration
Four-sensor Wi-Fi data logger with colour OLED display and local storage for more than one million measured values. Measures temperature, humidity, air pressure and three-axis orientation, with scheduled or continuous wireless transfer.
This MSR145W2D records internal temperature from −20 to +65 °C, relative humidity from 0–100%, absolute air pressure from 10–2,000 mbar and static three-axis acceleration over ±15 g. Select recording intervals from one second to 12 hours and view measurements on the colour OLED display. The acceleration channel supports orientation and slower movement measurements at this recording rate.
Wi-Fi can be active continuously for live observation or in scheduled windows to reduce power consumption. Recorded values remain in the data logger if Wi-Fi is unavailable and can be read through USB. Internal memory holds more than one million measured values. MSR LocalCloud and SmartCloud are supported destinations, subject to the required setup and service arrangements.
The B25 polycarbonate housing contains a USB-rechargeable 230 mAh battery and is rated IP60: dust-tight, with no water-protection rating. MSR PC and WLAN software provide configuration and evaluation.
Benefits
- Four internal sensor types with OLED readout
- Scheduled Wi-Fi transfer or continuous live observation
- Local recordings remain available during a Wi-Fi interruption
- Support for MSR LocalCloud and SmartCloud
- More than one million measured values and USB readout
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145W2DB25T9H3P5A |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 35 × 17 × 57 mm |
| Approximate data logger housing weight | 27 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB, WiFi |
| Internal memory | Over 1,000,000 measured values |
| OLED display | 96 × 64 pixels |
| Logging interval | 1 second to 12 hours |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Internal temperature range | −20 to +65 °C |
| Temperature accuracy T9 | ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply |
| Temperature interval | 1 second to 12 hours |
| Relative humidity range | 0–100 % RH |
| Humidity accuracy H3/FH3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Humidity sensor temperature limits | External: −40 to +125 °C; internal: −20 to +65 °C |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- MSR145W2D data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible WiFi network or access point for wireless transfer
- MSR SmartCloud account and activation are required if cloud transfer is used