MSR145W2D Wi-Fi Data Logger with Four Analogue Inputs, Control Terminal and FlexConnector

Tuotenumero: 145W2DB23 & E3333/020 & FY/020 & FX/020
Normaali hinta 702.00 € (ex VAT)

Wi-Fi data logger combining four 0–3 V analogue inputs, a recording/alarm control terminal and a FlexConnector for an optional sensor. Includes 20 cm connection cables, a colour OLED display and a 900 mAh rechargeable battery.

 

This MSR145W2D records four analogue 0–3 V signals through E3333/020. The FY/020 control terminal provides an alarm output, an external recording start/stop input and a 3 V output. FX/020 supplies a FlexConnector for a compatible interchangeable MSR FlexSensor, which must be chosen separately. Each of the three assemblies has a 20 cm cable. Recording intervals range from one second to 12 hours, with storage for more than one million measured values.

A colour OLED display provides local checks, and Wi-Fi supports continuous or scheduled data transfer. Recorded values remain available locally if the network is interrupted; USB offers readout and charging. MSR LocalCloud or SmartCloud can be used with the necessary setup and service arrangements. The B23 housing contains a 900 mAh rechargeable battery. Its IP60 rating means the polycarbonate enclosure is dust-tight but has no water-protection rating.

Benefits

  • Four analogue inputs configured for 0–3 V
  • Alarm output and external recording control through FY/020
  • FlexConnector for a separately selected FlexSensor
  • Wi-Fi transfer plus local memory and USB readout
  • OLED display and larger 900 mAh rechargeable battery

 



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Product code 145W2DB23 & E3333/020 & FY/020 & FX/020
Housing Polycarbonate, not encapsulated
Protection rating IP60
Battery 900 mAh rechargeable lithium-polymer
Charging USB
Dimensions of data logger (W × H × L) 35 × 25 × 57 mm
Approximate data logger housing weight 43 g; connected sensor assemblies add weight
Operating temperature of data logger −20 to +65 °C
Storage conditions +5 to +45 °C; 10–95 % RH, non-condensing
Interfaces USB, WiFi
Internal memory Over 1,000,000 measured values
OLED display 96 × 64 pixels
Logging interval 1 second to 12 hours
PC requirement Windows 10 or higher for current MSR PC Software Pro
Analogue inputs 4 × 0–3.0 V
Analogue resolution 12 bit
Analogue interval 1 second to 12 hours
Control terminal Alarm output, start/stop input and 3 V voltage output
FlexConnector Connection for interchangeable MSR FlexSensors
External component E3333/020 1 × E3333/020; cable 20 cm
External component FY/020 1 × FY/020; cable 20 cm
External component FX/020 1 × FX/020; cable 20 cm
External component FH3/100 2 × FH3/100; cable 100 cm
Air pressure accuracy ±2 mbar at 750–1,100 mbar absolute and +25 °C
Pressure sensor additional channel Integrated temperature
Air pressure interval 1 second to 12 hours
Acceleration 3 axes; ±15 g
Acceleration accuracy ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C
Acceleration recording interval 1 second to 12 hours


 

Included configuration

  • MSR145W2D data logger in the specified housing with rechargeable battery
  • Selected sensors and connections listed in this configuration
  • MSR PC software (download)
  • USB connection cable
  • Activation key for free access to MSR SmartCloud

Requirements and accessories

  • Windows 10 or higher with USB connection for current MSR PC Software Pro
  • Compatible WiFi network or access point for wireless transfer
  • MSR SmartCloud account and activation are required if cloud transfer is used
  • Suitable external signal sources; observe the configured input voltage range
  • Compatible FlexSensor for use of the FlexConnector; no FlexSensor is included in this product code

Documents and resources