MSR145W2D Wi-Fi Data Logger with Two Temperature and Two Humidity Probes

Tuotenumero: 145W2DB25 & FT2/100 & FT2/100 & FH3/100 & FH3/100
Normaali hinta 985.00 € (ex VAT)

Wi-Fi data logger supplied with two external temperature probes and two humidity probes with integrated temperature measurement, all on 1 m cables. Combines OLED readout with local memory and transfer to supported MSR cloud systems.

 

This configuration provides two FT2 temperature probes covering −55 to +125 °C and two FH3 humidity probes covering 0–100% RH, each with a 1 m cable. Both humidity probes also measure temperature and have a −40 to +125 °C sensor range. The MSR145W2D records these four probe positions at intervals from one second to 12 hours and stores more than one million measured values internally. The data logger itself must remain between −20 and +65 °C.

The colour OLED display shows measurements locally. Wi-Fi can transmit continuously or in scheduled windows, and MSR LocalCloud or SmartCloud can be used after the appropriate setup and service arrangements. Recordings remain on the device if the Wi-Fi connection fails, with USB providing another readout route. The B25 housing contains a 230 mAh USB-rechargeable battery and is rated IP60: dust-tight, with no water-protection rating.

Benefits

  • Two external temperature probes and two humidity/temperature probes
  • A 1 m cable for each of the four probe positions
  • OLED display and Wi-Fi transmission
  • Local storage protects recorded values during a Wi-Fi interruption
  • USB readout and support for LocalCloud or SmartCloud

 



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Product code 145W2DB25 & FT2/100 & FT2/100 & FH3/100 & FH3/100
Housing Polycarbonate, not encapsulated
Protection rating IP60
Battery 230 mAh rechargeable lithium-polymer
Charging USB
Dimensions of data logger (W × H × L) 35 × 17 × 57 mm
Approximate data logger housing weight 27 g; connected sensor assemblies add weight
Operating temperature of data logger −20 to +65 °C
Storage conditions +5 to +45 °C; 10–95 % RH, non-condensing
Interfaces USB, WiFi
Internal memory Over 1,000,000 measured values
OLED display 96 × 64 pixels
Logging interval 1 second to 12 hours
PC requirement Windows 10 or higher for current MSR PC Software Pro
Relative humidity range 0–100 % RH
Humidity accuracy H3/FH3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Humidity sensor temperature limits External: −40 to +125 °C; internal: −20 to +65 °C
Humidity interval 1 second to 12 hours
Humidity sensor additional channel Integrated temperature
External temperature range FT2 −55 to +125 °C
External temperature accuracy FT2 ±0.5 °C (−10 to +65 °C); ±2 °C (−55 to +125 °C)
External component FT2/100 2 × FT2/100; cable 100 cm
External component FH3/100 2 × FH3/100; cable 100 cm
Air pressure accuracy ±2 mbar at 750–1,100 mbar absolute and +25 °C
Pressure sensor additional channel Integrated temperature
Air pressure interval 1 second to 12 hours
Acceleration 3 axes; ±15 g
Acceleration accuracy ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C
Acceleration recording interval 1 second to 12 hours


 

Included configuration

  • MSR145W2D data logger in the specified housing with rechargeable battery
  • Selected sensors and connections listed in this configuration
  • MSR PC software (download)
  • USB connection cable
  • Activation key for free access to MSR SmartCloud

Requirements and accessories

  • Windows 10 or higher with USB connection for current MSR PC Software Pro
  • Compatible WiFi network or access point for wireless transfer
  • MSR SmartCloud account and activation are required if cloud transfer is used
  • Compatible full-bridge strain gauge; the product code specifies the connection, not a strain gauge sensor

Documents and resources