MSR145WD Bluetooth Data Logger with Four Analogue Inputs, Control Terminal and FlexConnector
Four analogue 0–3 V inputs, a recording/alarm control terminal and a FlexConnector in one Bluetooth data logger. Each connection has a 20 cm cable; the OLED display and 900 mAh battery support local and wireless operation.
This MSR145WD records four analogue voltage signals from 0 to 3 V through E3333/020. It also includes an FY/020 control terminal with an alarm output, an input for starting and stopping recording, and a 3 V output. The FX/020 FlexConnector accepts a compatible interchangeable MSR FlexSensor, which is not included. All three connection assemblies have 20 cm cables. Recording intervals range from one second to 12 hours, with internal storage for more than one million measured values.
The colour OLED display and MSR DataLogger app provide local and Bluetooth access. The B23 housing contains the larger 900 mAh rechargeable battery; USB supports charging, PC readout and setup with the included MSR software. The polycarbonate housing is rated IP60: dust-tight, with no water-protection rating. External sensors and any BLE/LAN cloud gateway must be selected separately.
Benefits
- Four analogue inputs configured for 0–3 V signals
- Control terminal for alarm signalling and external recording control
- FlexConnector for a separately selected interchangeable FlexSensor
- 20 cm cables on the input, control and FlexConnector assemblies
- OLED, Bluetooth and the larger 900 mAh rechargeable battery
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145WDB23 & E3333/020 & FY/020 & FX/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 900 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 35 × 25 × 57 mm |
| Approximate data logger housing weight | 43 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB, Bluetooth Low Energy |
| Internal memory | Over 1,000,000 measured values |
| OLED display | 96 × 64 pixels |
| Logging interval | 1 second to 12 hours |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Analogue inputs | 4 × 0–3.0 V |
| Analogue resolution | 12 bit |
| Analogue interval | 1 second to 12 hours |
| Control terminal | Alarm output, start/stop input and 3 V voltage output |
| FlexConnector | Connection for interchangeable MSR FlexSensors |
| External component E3333/020 | 1 × E3333/020; cable 20 cm |
| External component FY/020 | 1 × FY/020; cable 20 cm |
| External component FX/020 | 1 × FX/020; cable 20 cm |
| Wetted materials | Stainless steel AISI 316L and Viton 70 Shore O-rings |
| External temperature range FT2 | −55 to +125 °C |
| External temperature accuracy FT2 | ±0.5 °C (−10 to +65 °C); ±2 °C (−55 to +125 °C) |
| External component FT2/100 | 2 × FT2/100; cable 100 cm |
| External component FH3/100 | 1 × FH3/100; cable 100 cm |
| External component FP9/100 | 1 × FP9/100; cable 100 cm |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- MSR145WD data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible mobile device and MSR DataLogger app for Bluetooth access
- MSR SmartCloud account and activation are required if cloud transfer is used; a BLE gateway is optional
- Suitable external signal sources; observe the configured input voltage range
- Compatible FlexSensor for use of the FlexConnector; no FlexSensor is included in this product code