MSR165 ±200 g Shock and Environmental Data Logger with microSD and IP67 Housing

Tuotenumero: 165B8T9H3P5A3L3 & N10006
Normaali hinta 2,369.00 € (ex VAT)

Combine ±200 g shock and vibration recording with temperature, humidity, air pressure and light. Includes microSD storage beyond one billion measured values; the card slot has a lower protection rating than the encapsulated housing.

 

This MSR165 records ±200 g three-axis acceleration at up to 1,600 readings per second, retaining 32 values before a shock trigger. It also records temperature from −20 to +65 °C, humidity from 0–100% RH, absolute air pressure from 10–2,000 mbar and light from 0–83,000 lx. Environmental intervals range from one second to 12 hours.

N10006 adds a formatted microSD card of at least 4 GB and expands storage to more than one billion measured values. The card can be replaced during operation. The B8 housing is IP67: dust-tight and protected against temporary immersion under specified test conditions. However, the card slot with card is only IP60, with no water-protection rating. The complete connected configuration must not be treated as uniformly IP67 or suitable for immersion.

The 1000 mAh battery is rechargeable via USB. Included MSR PC software and ShockViewer support configuration, readout and evaluation of the shock and environmental records. Recording duration depends on sampling, event activity and power consumption.

Benefits

  • ±200 g acceleration together with four environmental quantities
  • Acceleration recording up to 1,600 Hz and 32 pre-trigger values
  • Light measurements up to 83,000 lx
  • Included microSD expansion and formatted card of at least 4 GB
  • USB-rechargeable battery and included shock-analysis software

Applications

  • Transport monitoring
  • Machine fault diagnosis
  • Load and vibration investigations



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Model family MSR165
Product code 165B8T9H3P5A3L3 & N10006
Memory More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion
Memory extension N10006; ≥4 GB formatted microSD card; exposed slot rated IP60
Acceleration range ±200 g, three axes
Acceleration resolution 13 bit
Acceleration measurement/storage rate Up to 1,600/s (±15%) to every 12 h
Acceleration accuracy at +25 °C ±2 g (0–15 g); ±5 g (15–100 g); ±10 g (100–200 g)
Pre-trigger recording 32 values before the shock event
Temperature range −20 to +65 °C
Humidity range 0–100 % RH
Pressure range 10–2,000 mbar absolute
Light range 0–83,000 lx; maximum sensitivity at 550 nm
Environmental sensor recording interval 1 second to 12 hours
Operating temperature −20 to +65 °C
Interface USB
Dimensions (W × H × L) 39 × 23 × 72 mm
Approximate weight 69 g
Battery 1,000 mAh rechargeable LiPo
Housing/protection Anodised aluminium/PC; IP67 housing, microSD slot IP60
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Humidity accuracy H3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Air pressure accuracy P5 ±2 mbar (750–1,100 mbar absolute, +25 °C)

 

Included configuration

  • 1 × MSR165 data logger configured as 165B8T9H3P5A3L3 & N10006
  • Specified battery supply
  • MSR PC software available for download
  • N10006 expansion and one formatted microSD card, at least 4 GB
  • USB cable
  • Screw set
  • Transport case
  • Quick start guide

Requirements and accessories

  • Windows PC with USB port for configuration and data evaluation; verify current supported OS release
  • Observe IP60 (dust-tight, with no water protection rating) limitation at the microSD slot

Documents and resources