MSR145 Data Logger with External 0–30 bar Absolute Fluid-Pressure Sensor

SKU: 145B15 & FP4/020
Tavahind 469.00 € (ex VAT)

Compact data logger with an external 0–30 bar absolute fluid-pressure sensor on a 20 cm cable. Captures pressure at up to 10 readings per second and includes temperature measurement in the pressure sensor.

 

This MSR145 uses an external FP4/020 sensor to record absolute fluid pressure from 0 to 30 bar. The 20 cm cable separates the pressure measuring point from the data logger. Pressure recording reaches ten readings per second, with longer intervals selectable up to 12 hours. Temperature measurement is integrated into the pressure sensor, whose operating range is −20 to +85 °C. Wetted materials are AISI 316L stainless steel and Viton seals, which must be compatible with the measured medium.

The data logger itself operates from −20 to +65 °C and stores more than two million measured values. Its B15 polycarbonate housing contains a 230 mAh rechargeable battery and is rated IP60: dust-tight, with no water-protection rating. USB provides charging and readout, while the included MSR PC Software Pro supports setup and measurement analysis.

Benefits

  • External absolute fluid-pressure measurement from 0 to 30 bar
  • Pressure recording up to 10 Hz
  • 20 cm cable and integrated sensor temperature measurement
  • AISI 316L stainless steel and Viton wetted components
  • Compact USB-rechargeable data logger with included analysis software

 



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Product code 145B15 & FP4/020
Housing Polycarbonate, not encapsulated
Protection rating IP60
Battery 230 mAh rechargeable lithium-polymer
Charging USB
Dimensions of data logger (W × H × L) 27 × 16 × 53 mm
Approximate data logger housing weight 20 g; connected sensor assemblies add weight
Operating temperature of data logger −20 to +65 °C
Storage conditions +5 to +45 °C; 10–95 % RH, non-condensing
Interfaces USB
Internal memory Over 2,000,000 measured values
PC requirement Windows 10 or higher for current MSR PC Software Pro
Fluid pressure range 0–30 bar absolute
Fluid pressure accuracy ±0.3 bar (1 % FS)
Fluid pressure interval 0.1 second to 12 hours
Fluid sensor operating temperature −20 to +85 °C
Wetted materials Stainless steel AISI 316L and Viton 70 Shore O-rings
External component FP4/020 1 × FP4/020; cable 20 cm
Humidity interval 1 second to 12 hours
Humidity sensor additional channel Integrated temperature
Absolute air pressure range 10–2,000 mbar absolute
Air pressure accuracy ±2 mbar at 750–1,100 mbar absolute and +25 °C
Pressure sensor additional channel Integrated temperature
Air pressure interval 1 second to 12 hours
Light range 0–83,000 lx
Light sensitivity Maximum at 550 nm
Light interval 1 second to 12 hours


 

Included configuration

  • MSR145 data logger in the specified housing with rechargeable battery
  • Selected sensors and connections listed in this configuration
  • MSR PC software (download)
  • USB connection cable

Requirements and accessories

  • Windows 10 or higher with USB connection for current MSR PC Software Pro
  • Compatible process connection and media for the pressure sensor’s wetted materials

Documents and resources