MSR145 Data Logger with Four Analogue Inputs (0–12 V) and 20 cm Cable
Data logger for four analogue 0–12 V signals, with a 20 cm connection cable and a 230 mAh rechargeable battery. Select recording rates up to 50 Hz and analyse the stored measurements via USB.
The E6666/020 connection equips this MSR145 with four analogue voltage inputs, each covering 0–12 V. Its 20 cm cable brings compatible external signal sources into a compact, battery-powered recording system. Select recording intervals from 50 readings per second to one reading every 12 hours and store more than two million measured values internally. External sensors or signal sources are required separately.
The B15 polycarbonate housing has an IP60 rating, meaning it is dust-tight but has no water-protection rating. The 230 mAh lithium-polymer battery is recharged through USB, which also transfers recorded data to a PC. Included MSR PC Software Pro provides setup and analysis. The four inputs are the selected 0–12 V configuration, rather than a user-switchable set of all the voltage and current options in the product family.
Benefits
- Four separate analogue inputs covering 0–12 V
- 20 cm cable for connection to compatible signal sources
- Recording rate up to 50 Hz
- More than two million measured values in internal memory
- USB charging and included configuration and analysis software
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145B15 & E6666/020 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 27 × 16 × 53 mm |
| Approximate data logger housing weight | 20 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB |
| Internal memory | Over 2,000,000 measured values |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Analogue inputs | 4 × 0–12.0 V |
| Analogue resolution | 12 bit |
| Analogue interval | 0.02 second to 12 hours |
| External component E6666/020 | 1 × E6666/020; cable 20 cm |
| Humidity accuracy H3/FH3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Humidity sensor temperature limits | External: −40 to +125 °C; internal: −20 to +65 °C |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Light range | 0–83,000 lx |
| Light sensitivity | Maximum at 550 nm |
| Light interval | 1 second to 12 hours |
Included configuration
- MSR145 data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Suitable external signal sources; observe the configured input voltage range