MSR145 Strain-Gauge Data Logger with 20 cm Connection and microSD
Full-bridge strain-gauge data logger with one 20 cm connection, 3 V bridge supply and a 1000 mAh rechargeable battery. The included microSD expansion raises storage beyond one billion measured values; a compatible strain gauge is required separately.
This configuration combines an MSR145 with one FD/020 strain-gauge connection and the N10006 microSD expansion. The 20 cm connection is intended for a compatible full-bridge strain gauge and provides a 3 V bridge supply. Recording intervals range from one second to 12 hours. The strain gauge is not included, and its compatibility must be checked against the confirmed FD specification.
The supplied, formatted microSD card has a capacity of at least 4 GB and expands storage to more than one billion measured values, in addition to the data logger's internal memory of over two million values. The B7 polycarbonate housing contains a 1000 mAh rechargeable battery. Both the housing and the microSD slot with card are rated IP60: dust-tight, with no water-protection rating. USB provides charging and data transfer, and MSR PC Software Pro is included for configuration and evaluation.
Benefits
- Full-bridge connection with a 20 cm cable and 3 V supply
- Included microSD expansion for more than one billion measured values
- Formatted microSD card of at least 4 GB supplied
- 1000 mAh USB-rechargeable battery
- Included software for configuration and measurement analysis
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145B7 & FD/020 & N10006 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 1000 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 39 × 23 × 72 mm |
| Approximate data logger housing weight | 56 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB |
| Internal memory | Over 2,000,000 measured values |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Strain gauge connection | Full bridge; rated output 1–4 mV/V; bridge voltage 3 V |
| Strain gauge interval | 1 second to 12 hours |
| Memory expansion | N10006 microSD expansion; over 1 billion measured values |
| External component FD/020 | 1 × FD/020; cable 20 cm |
| Humidity accuracy H3/FH3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Humidity sensor temperature limits | External: −40 to +125 °C; internal: −20 to +65 °C |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| Absolute air pressure range | 10–2,000 mbar absolute |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 0.02 second to 12 hours |
Included configuration
- MSR145 data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- microSD expansion slot and one formatted microSD card of at least 4 GB
- USB connection cable
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible full-bridge strain gauge; the product code specifies the connection, not a strain gauge sensor