MSR145W2D Wi-Fi Data Logger with Two Temperature and Two Humidity Probes
Wi-Fi data logger supplied with two external temperature probes and two humidity probes with integrated temperature measurement, all on 1 m cables. Combines OLED readout with local memory and transfer to supported MSR cloud systems.
This configuration provides two FT2 temperature probes covering −55 to +125 °C and two FH3 humidity probes covering 0–100% RH, each with a 1 m cable. Both humidity probes also measure temperature and have a −40 to +125 °C sensor range. The MSR145W2D records these four probe positions at intervals from one second to 12 hours and stores more than one million measured values internally. The data logger itself must remain between −20 and +65 °C.
The colour OLED display shows measurements locally. Wi-Fi can transmit continuously or in scheduled windows, and MSR LocalCloud or SmartCloud can be used after the appropriate setup and service arrangements. Recordings remain on the device if the Wi-Fi connection fails, with USB providing another readout route. The B25 housing contains a 230 mAh USB-rechargeable battery and is rated IP60: dust-tight, with no water-protection rating.
Benefits
- Two external temperature probes and two humidity/temperature probes
- A 1 m cable for each of the four probe positions
- OLED display and Wi-Fi transmission
- Local storage protects recorded values during a Wi-Fi interruption
- USB readout and support for LocalCloud or SmartCloud
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Product code | 145W2DB25 & FT2/100 & FT2/100 & FH3/100 & FH3/100 |
| Housing | Polycarbonate, not encapsulated |
| Protection rating | IP60 |
| Battery | 230 mAh rechargeable lithium-polymer |
| Charging | USB |
| Dimensions of data logger (W × H × L) | 35 × 17 × 57 mm |
| Approximate data logger housing weight | 27 g; connected sensor assemblies add weight |
| Operating temperature of data logger | −20 to +65 °C |
| Storage conditions | +5 to +45 °C; 10–95 % RH, non-condensing |
| Interfaces | USB, WiFi |
| Internal memory | Over 1,000,000 measured values |
| OLED display | 96 × 64 pixels |
| Logging interval | 1 second to 12 hours |
| PC requirement | Windows 10 or higher for current MSR PC Software Pro |
| Relative humidity range | 0–100 % RH |
| Humidity accuracy H3/FH3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Humidity sensor temperature limits | External: −40 to +125 °C; internal: −20 to +65 °C |
| Humidity interval | 1 second to 12 hours |
| Humidity sensor additional channel | Integrated temperature |
| External temperature range FT2 | −55 to +125 °C |
| External temperature accuracy FT2 | ±0.5 °C (−10 to +65 °C); ±2 °C (−55 to +125 °C) |
| External component FT2/100 | 2 × FT2/100; cable 100 cm |
| External component FH3/100 | 2 × FH3/100; cable 100 cm |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- MSR145W2D data logger in the specified housing with rechargeable battery
- Selected sensors and connections listed in this configuration
- MSR PC software (download)
- USB connection cable
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows 10 or higher with USB connection for current MSR PC Software Pro
- Compatible WiFi network or access point for wireless transfer
- MSR SmartCloud account and activation are required if cloud transfer is used
- Compatible full-bridge strain gauge; the product code specifies the connection, not a strain gauge sensor