MSR147W2D Wi-Fi Data Logger with Five Humidity and Temperature Sensors
Wi-Fi data logger with five humidity/temperature sensors on 20 cm cables. Individual sensor removal and installation should be carried out by a technically competent person. Automatic sensor recognition, calibration stored in each sensor and an OLED display simplify multipoint recording, with LocalCloud or SmartCloud connectivity.
Five FH3.3 sensors allow this MSR147W2D to record humidity and temperature at separate measuring points. Each has a 20 cm cable, a 0–100% RH range and a sensor temperature range of −40 to +125 °C. The standard black cables are rated to +75 °C, while the data logger operates from −20 to +65 °C. Record at intervals from one second to 12 hours. The sensors can be removed and installed individually. Sensor removal and installation should be carried out by a technically competent person. Each sensor is recognised automatically and stores its own calibration data.
Read measurements on the colour OLED display or transfer them over Wi-Fi to the supported MSR software, LocalCloud or SmartCloud, with the necessary network and service setup. More than one million values are stored locally, and recordings remain available if wireless transmission is interrupted. USB provides another readout route and recharges the 230 mAh battery.
The B25 polycarbonate housing and sensor connections are rated IP60: dust-tight, with no water-protection rating. MSR describes this sensor system for temperature/humidity monitoring and textile microclimate measurements.
Benefits
- Five humidity/temperature sensors, individually replaceable by a technically competent person
- Automatic sensor recognition with calibration stored in each sensor
- 20 cm cables and a colour OLED display
- Wi-Fi connection to MSR LocalCloud or SmartCloud
- Local memory and USB readout during network interruptions
Applications
- Textile and clothing microclimate studies
- Sports-equipment comfort testing
- Multi-point temperature and humidity monitoring
CONFIGURE YOUR OWN DEVICE >>
Technical specifications
| Manufacturer | MSR Electronics GmbH |
|---|---|
| Model family | MSR147W2D |
| Product code | 147W2DB25 & FH3.3/020 & FH3.3/020 & FH3.3/020 & FH3.3/020 & FH3.3/020 |
| Probe configuration | 5 × FH3.3/020; humidity with integrated temperature |
| Cable length | 0.20 m per probe |
| Humidity range | 0–100 % RH |
| Probe temperature range | −40 to +125 °C; standard black cable rated up to +75 °C |
| Recording interval | 1 second to 12 hours |
| Memory | More than 1,000,000 measured values |
| Display | Colour OLED, 96 × 64 pixels |
| Interfaces | USB; Wi-Fi |
| Battery | 230 mAh rechargeable lithium-polymer; USB charging |
| Protection | IP60 |
| Dimensions (W × H × L) | 35 × 17 × 57 mm, data logger only |
| Data Logger weight | Approx. 27 g |
| Data Logger operating temperature | −20 to +65 °C |
| Humidity accuracy FH3.3 | ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C) |
| Bluetooth range | Up to 50 m |
| Control terminal | Alarm output, start/stop input and 3 V voltage output |
| FlexConnector | Connection for interchangeable MSR FlexSensors |
| External component E3333/020 | 1 × E3333/020; cable 20 cm |
| External component FY/020 | 1 × FY/020; cable 20 cm |
| External component FX/020 | 1 × FX/020; cable 20 cm |
| External component FH3/100 | 2 × FH3/100; cable 100 cm |
| Air pressure accuracy | ±2 mbar at 750–1,100 mbar absolute and +25 °C |
| Pressure sensor additional channel | Integrated temperature |
| Air pressure interval | 1 second to 12 hours |
| Acceleration | 3 axes; ±15 g |
| Acceleration accuracy | ±0.15 g (0–5 g), ±0.25 g (5–10 g), ±0.45 g (10–15 g), at +25 °C |
| Acceleration recording interval | 1 second to 12 hours |
Included configuration
- 1 × MSR147W2D data logger, housing B25, integrated 230 mAh battery
- 5 × FH3.3/020 temperature/humidity probes with 20 cm leads
- MSR PC software available for download
- USB cable
- Hook-and-loop strap
- Quick start guide
- Activation key for free access to MSR SmartCloud
Requirements and accessories
- Windows PC with USB connection for MSR PC software; verify current supported OS release
- Keep sensor connectors within their IP60 (dust-tight, with no water protection rating) protection limitations
- Compatible Wi-Fi network and configured LocalCloud/SmartCloud destination; mobile-network access requires separate router/service
- Sensor removal and installation should be carried out by a technically competent person.