MSR160 Data Logger with Four Analogue Inputs and microSD, 1000 Hz per Channel

SKU: 160B7 & E3333 & N10006
Tavahind 1,539.00 € (ex VAT)

Four 0–3 V analogue channels at up to 1,000 readings per second per channel, with microSD storage for more than one billion measured values. Includes a formatted card, alarm output and external recording control.

 

This MSR160 combines four E3333 analogue 0–3 V inputs with the N10006 microSD expansion. Each input can record at up to 1,000 readings per second, with selectable slower intervals up to 12 hours. Compatible external signal sources or sensors are connected separately. An alarm output and a recording start/stop input are included.

The supplied, formatted microSD card is at least 4 GB and expands capacity to more than one billion measured values, alongside internal memory for over two million values. MSR specifies that the card can be replaced during operation. Capacity is shared across the recorded channels, and recording duration also depends on power and sampling settings.

The B7 housing and microSD slot with card are rated IP60: dust-tight, with no water-protection rating. USB provides charging and data transfer. Included MSR PC software handles configuration and analysis of the recordings.

Benefits

  • Four 0–3 V channels with up to 1 kHz per channel
  • Included microSD expansion and formatted card of at least 4 GB
  • Storage capacity above one billion measured values
  • Card replacement during operation
  • Alarm output, recording-control input and USB analysis

Applications

  • Industrial signal recording
  • Sensor evaluation
  • Machine and process monitoring



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Model family MSR160
Product code 160B7 & E3333 & N10006
Memory More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion
Memory extension N10006; ≥4 GB formatted microSD card; exposed slot rated IP60
Analogue inputs 4 × 0–3 V (E3333); 12-bit resolution
Analogue sampling 1,000/s per channel to every 12 h
Control I/O Alarm output; recording start/stop input
Operating temperature −20 to +65 °C
Interface USB
Dimensions (W × H × L) 39 × 23 × 72 mm
Approximate weight 80 g
Battery 900 mAh rechargeable LiPo
Housing/protection B7, non-encapsulated; IP60
Data Logger weight Approx. 36 g
Data Logger operating temperature −20 to +65 °C
Humidity accuracy FH3.3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)

 

Included configuration

  • 1 × MSR160 data logger configured as 160B7 & E3333 & N10006
  • Specified battery supply
  • MSR PC software available for download
  • N10006 expansion and one formatted microSD card, at least 4 GB
  • USB cable
  • Screw set
  • Quick start guide

Requirements and accessories

  • Windows PC with USB port for configuration and data evaluation; verify current supported OS release
  • Compatible external sensors or sources with 0–3 V outputs; these third-party sensors are not specified in this offer
  • Observe IP60 (dust-tight, with no water protection rating) limitation at the microSD slot

Documents and resources