MSR165 ±15 g Shock and Climate Data Logger with microSD and Extended Battery Supply

SKU: 165B52T9H3P5A & N10006
Tavahind 2,523.00 € (ex VAT)

Long-duration shock and vibration configuration with two replaceable 5,800 mAh batteries and microSD storage beyond one billion measured values. Records ±15 g acceleration, temperature, humidity and absolute air pressure.

 

This MSR165 pairs a three-axis ±15 g acceleration sensor with temperature, humidity and absolute air-pressure measurement. Acceleration records at up to 1,600 readings per second, with 32 values retained before a shock trigger. The environmental channels cover −20 to +65 °C, 0–100% RH and 10–2,000 mbar absolute, at intervals from one second to 12 hours.

The B52 power option uses two replaceable 5,800 mAh Li-SOCl₂ batteries in a splashproof cast-aluminium case. MSR quotes shock-monitoring periods of up to five years with this power option, depending on the measurement rate and setup; this is not a guarantee of uninterrupted full-rate recording. N10006 adds a formatted microSD card of at least 4 GB and expands storage beyond one billion measured values. The card can be replaced during operation.

The microSD slot with card is rated IP60: dust-tight, with no water-protection rating. Use USB or the card to transfer recordings, then analyse shock-mode data with the included MSR PC software and ShockViewer.

Benefits

  • Two replaceable 5,800 mAh batteries for extended monitoring
  • ±15 g shock data with temperature, humidity and air pressure
  • Up to 1,600 Hz acceleration and 32 pre-trigger values
  • Included microSD expansion with over one billion values of storage
  • Splashproof battery case and included analysis software

Applications

  • Transport monitoring
  • Machine fault diagnosis
  • Load and vibration investigations



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Model family MSR165
Product code 165B52T9H3P5A & N10006
Memory More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion
Memory extension N10006; ≥4 GB formatted microSD card; exposed slot rated IP60
Acceleration range ±15 g, three axes
Acceleration resolution 13 bit
Acceleration measurement/storage rate Up to 1,600/s (±15%) to every 12 h
Acceleration accuracy at +25 °C ±0.15 g (0–5 g); ±0.3 g (5–15 g)
Pre-trigger recording 32 values before the shock event
Temperature range −20 to +65 °C
Humidity range 0–100 % RH
Pressure range 10–2,000 mbar absolute
Environmental sensor recording interval 1 second to 12 hours
Operating temperature −20 to +65 °C
Interface USB
Dimensions (W × H × L) 122 × 92 × 70 mm
Approximate weight 530 g
Battery 2 × 5,800 mAh replaceable Li-SOCl₂, 3.6 V
Housing/protection Splashproof cast aluminium battery housing; microSD slot IP60
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Humidity accuracy H3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Air pressure accuracy P5 ±2 mbar (750–1,100 mbar absolute, +25 °C)
Air pressure accuracy P5 ±2 mbar (750–1,100 mbar absolute, +25 °C)

 

Included configuration

  • 1 × MSR165 data logger configured as 165B52T9H3P5A & N10006
  • Specified battery supply
  • MSR PC software available for download
  • N10006 expansion and one formatted microSD card, at least 4 GB
  • USB cable
  • Screw set
  • Transport case
  • Quick start guide

Requirements and accessories

  • Windows PC with USB port for configuration and data evaluation; verify current supported OS release
  • Observe IP60 (dust-tight, with no water protection rating) limitation at the microSD slot

Documents and resources