MSR165 ±15 g Shock and Temperature Data Logger with microSD and IP67 Housing

SKU: 165B8T9A & N10006
Tavahind 1,976.00 € (ex VAT)

Three-axis ±15 g shock and vibration data logger with temperature sensing and microSD storage for more than one billion measured values. Acceleration recording reaches 1,600 Hz; the microSD slot has a lower protection rating than the housing.

 

This MSR165 combines ±15 g three-axis shock and vibration measurement with an internal −20 to +65 °C temperature sensor and N10006 microSD storage. Acceleration records at up to 1,600 readings per second, with 32 values retained before a shock trigger. Temperature intervals range from one second to 12 hours. The supplied, formatted microSD card is at least 4 GB and expands capacity to more than one billion measured values; it can be replaced during operation.

The B8 housing is rated IP67: dust-tight and protected against temporary immersion under specified test conditions. The microSD slot with a card is only IP60, meaning dust-tight with no water-protection rating. This complete configuration must not be treated as uniformly IP67 or suitable for immersion.

A 1000 mAh battery is rechargeable via USB. Actual recording duration depends on power, sampling and event settings. Included MSR PC software and ShockViewer support data transfer, shock analysis and report creation.

Benefits

  • ±15 g acceleration at up to 1,600 Hz plus temperature recording
  • 32 values recorded before a shock trigger
  • Included microSD expansion with more than one billion values of storage
  • Formatted card of at least 4 GB, replaceable during operation
  • USB-rechargeable 1000 mAh battery and included analysis software

Applications

  • Transport monitoring
  • Machine fault diagnosis
  • Load and vibration investigations



CONFIGURE YOUR OWN DEVICE >>

 

 

Technical specifications

Manufacturer MSR Electronics GmbH
Model family MSR165
Product code 165B8T9A & N10006
Memory More than 2,000,000 measured values internally; more than 1 billion with included microSD expansion
Memory extension N10006; ≥4 GB formatted microSD card; exposed slot rated IP60
Acceleration range ±15 g, three axes
Acceleration resolution 13 bit
Acceleration measurement/storage rate Up to 1,600/s (±15%) to every 12 h
Acceleration accuracy at +25 °C ±0.15 g (0–5 g); ±0.3 g (5–15 g)
Pre-trigger recording 32 values before the shock event
Temperature range −20 to +65 °C
Environmental sensor recording interval 1 second to 12 hours
Operating temperature −20 to +65 °C
Interface USB
Dimensions (W × H × L) 39 × 23 × 72 mm
Approximate weight 69 g
Battery 1,000 mAh rechargeable LiPo
Housing/protection Anodised aluminium/PC; IP67 housing, microSD slot IP60
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Housing/protection Anodised aluminium/PC; IP67
Temperature accuracy T9 ±0.1 °C (−25 to +55 °C); ±0.3 °C (−40 to +125 °C); data logger operating limits apply
Humidity accuracy H3 ±2 % RH (10–80 % RH, +25 °C); ±3 % RH (80–100 % RH, +25 °C)
Air pressure accuracy P5 ±2 mbar (750–1,100 mbar absolute, +25 °C)
Static acceleration accuracy at +25 °C ±0.15 g (0–5 g); ±0.25 g (5–10 g); ±0.45 g (10–15 g)

 

Included configuration

  • 1 × MSR165 data logger configured as 165B8T9A & N10006
  • Specified battery supply
  • MSR PC software available for download
  • N10006 expansion and one formatted microSD card, at least 4 GB
  • USB cable
  • Screw set
  • Transport case
  • Quick start guide

Requirements and accessories

  • Windows PC with USB port for configuration and data evaluation; verify current supported OS release

Documents and resources